- Navigation path
- Admin Console > Devices> [Button] Add Device
To add a new device, navigate to the 'Devices' page and click the 'Add Device' button located at the top left corner. This action opens a page where you can enter details for the new device. After entering the required information, click the 'Save' button to register the device.
[Device Name]: The name used to identify the device.
- Input format: No restriction.
- Input length: 1 to 20 characters.
- Default value: None.
If the input violates these rules, the following error message will be displayed:
- Please enter the device name between 1 and 20 characters.
[MAC Address]: The Ethernet MAC address assigned to the network interface used by the device to connect to the FilingBox MEGA2 server.
- Input format: Enter in lowercase separated by hyphens '-' (valid values: 0-9, a-f).
- Example: 11-22-33-aa-bb-dd
- Input length: 17 characters.
- Default value: None.
If the input does not meet the specified format, the following error message will be displayed:
- The MAC address entered does not match the required format.
[IP Address]: The IP address assigned to the interface used by the device to connect to the FilingBox MEGA2 server.
- Input format: Enter in the form 'x.y.z.u' (where x, y, z, u are numbers between 0 and 254; addresses like '0.0.0.0' or network addresses such as 'x.y.z.0' are not allowed).
- Example: 192.168.200.100
- Input length
- Minimum 7 characters
- Maximum 15 characters.
- Default Value: None.
If the input violates these rules, the following error message will be displayed:
- The IP address entered does not match the required format.
[Description]: A brief description of the device.
- Input format: No restriction.
- Input length: 1 to 100 characters.
- Default value: None.
If the input violates these rules, the following error message will be displayed:
- Please enter the description between 1 and 100 characters.